Reusing Iraqi Construction and Aggregates Waste to Manu-facturing Eco-Friendly Polymer Concrete
DOI:
https://doi.org/10.23851/mjs.v29i3.623Keywords:
Polymer concrete, Reusing Aggregates, Construction Waste, Eco-Friendly.Abstract
The recycling and reusing of waste materials to produce suitable materials is very important subjects to scientific research in world now, because the decrease natural resources and create a hole or risk in future of the world. The aim of our research to produce polymer concrete (PC) has high mechanical and physical characteristic. This PC was prepared by using the waste of aggregates and demolitions to make PC have good mechanical and physical characteristic with low cost as compared as cement concrete. In this research different types of construction and demolition waste were used as aggregates replacement (i.e. waste of cement/concrete debris, waste of ceramics and the waste of blocks) while the type of polymer resins (i.e. Epoxy) as cement replacements. The weight percentages of resin were changed within (20, 25 and 30) % to manufacture this polymer concrete. The tests we done like physical such as den-sity and mechanical such as compressive strength, flexural strength. Splitting tensile strength and Schmidt hammer rebound hardness.Downloads
References
Methaa, P.K. “A Concrete Technology for Sustainable Development: An Over-view of Essential Principles.” CANMETs / ACI International Symposium on Con-crete Technology for Sustainable Devel-opment, Vancouver, 1999.
Bjork, F. “Concrete Technology and Sus-tainable Development.” CANMETs / ACI International Symposium on Concrete Technology for Sustainable Development, Vancouver, 1999.
Edvardsen, C., and K. Tollose. “Envi-ronmentally ‘Green’ Concrete Struc-tures.” Proceedings of the FIB Symposi-um: Concrete and Environment, Berlin, October 2001.
American Concrete Institutes Committee / 548, “Polymer concrete-structural appli-cations. State-of-the-art report,” ACI Committee Report ACI / 548.6R-96, 1996.
American Concrete Institute Committee, “Guide for the use of polymers in con-crete,” ACI Committee Report ACI / 548 1R-09, 2009.
American Concrete Institute Committee, “Guide for the use of polymers in con-crete,” ACI Committee Report 548.1R-97, American Concrete Institute, 1997.
M. Golestaneh, G. Amini, G. D. Najafpour, and M. A. Beygii, “Evalua-tion of mechanical strength of EP poly-mer concrete with silica powder as fill-er,”World Applied Sciences Journal, Vol. 9, No. 2, pp. 216–220, 2010.
J. P. Gorninski, D. C. Dal Molin, and C. S. Kazmierczaki, “Study of the modulus of elasticity of polymer concrete com-pounds and comparative assessment of polymer concrete and portland cement concrete,” Cement and Concrete Re-search, vol. 34, no. 11, pp. 2091–2095, 2004.
M. E. TawfikandS. B. Eskandeir, “Poly-mer concrete frommarble wastes and re-cycled poly(ethylene terephthalate),” Journal of Elastomers and Plastics, Vol. 38, No. 1, pp. 65–79, 2006.
J. P. Gorninski, D. C. Dal Molin, and C. S. Kazmie rczak, “Strength degradation of polymer concrete in acidic environ-ments,” Cement and Concrete Compo-sites, Vol. 29, No. 8, pp. 637– 645, 2007.
J. T. San – Jos e, “Mechanical properties in resin polyester concrete, application to reinforced beams,” Science and Engineer-ing of Composite Materials, Vol. 13, No. 4, pp. 271–282, 2006.
B.S.1881, Part 116, "Method for Deter-mination of Compressive Strength of Concrete Cubes", British Standard Insti-tution, 1989, 3pp.
ASTM C496 , “Standard Test Method for Splitting Tensile Strength of Cylindri-cal Concrete Specimens“, Annual Book of ASTM Standard, Vol.04.02, 1989, pp., 259-262. USA
ASTM C805–02,“Standard Test Method for Rebound Number of Hardened Con-crete”, Annual Book of ASTM Stand-ards, Vol. 04.02 Concrete and Aggregate, 2002, USA.
ASTM C78 , “Standard Test Method for Flexural strength of Concrete (Using Simply Beam with Third point Loading,” Annual Book of ASTM Standard Ameri-can Society for Testing and Materials, Vol. 04. 02, 2003. USA
ASTM C138 , "Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete" An-nual Book of ASTM Standards Vol. 04-02/2004. USA
Downloads
Key Dates
Published
Issue
Section
License
Articles accepted for publication in Al-Mustansiriyah Journal of Science (MJS) are protected under the Creative Commons Attribution 4.0 International License (CC BY-NC). Authors of accepted articles are requested to sign a copyright release form prior to their article being published. All authors must agree to the submission, sign copyright release forms, and agree to be included in any correspondence between MJS and the authors before submitting a work to MJS. For personal or educational use, permission is given without charge to print or create digital copies of all or portions of a MJS article. However, copies must not be produced or distributed for monetary gain. It is necessary to respect the copyright of any parts of this work that are not owned by MJS.
How to Cite
