Study the effect of UV radiation on the thermal conductivity of the (Epoxy – polyurethane) blend reinforced with the particulate and nano Clay

Gasak talal suhail; Faik Hammad Anter; Ziyad Shihab Al-Sarraj

doi:10.23851/mjs.v30i1.554

Study the effect of UV radiation on the thermal conductivity of the (Epoxy – polyurethane) blend reinforced with the particulate and nano Clay

Authors

Gasak talal suhail Department of Physics, College of Sciences, Anbar University
Faik Hammad Anter Department of Physics, College of Sciences, Anbar University
Ziyad Shihab Al-Sarraj Department of Materials Research, Ministry of Science and Technology

DOI:

https://doi.org/10.23851/mjs.v30i1.554

Abstract

This research involves using epoxy resin and polyurethane resin to form a blend (Epoxy+ Polyurethane) with different ratios (90 – 10)%, (80 – 20)%, (70 – 30)%, and (60 – 40)% to get the best ratio for impact strength as a function of materiale toughness; then reinforced with micro and nano (Clay) and with weight fraction (2%, 4%, 6%, 8%). Thermal conductivity were studied in natural condition and after exposure to UV irradiationfor(24h). Results showed that the composite (nano Clay+ blend) had better properties compared with (micro Clay+ blend) composite. Also thermal conductivity show increases with increasing the weight fraction for all samples and values in the case of UV radiation are higher than values in natural condition.

Downloads

Published

2019-08-15

How to Cite

[1]

G. talal suhail, F. H. Anter, and Z. S. Al-Sarraj, “Study the effect of UV radiation on the thermal conductivity of the (Epoxy – polyurethane) blend reinforced with the particulate and nano Clay”, Al-Mustansiriyah Journal of Science, vol. 30, no. 1, pp. 178–183, Aug. 2019.

Issue

Vol. 30 No. 1 (2019)

Section

Physical Sciences

License

Articles accepted for publication in Al-Mustansiriyah Journal of Science (MJS) are protected under the Creative Commons Attribution 4.0 International License (CC-BY-NC). Authors of accepted articles are requested to sign a copyright release form prior to their article being published. All authors must agree to the submission, sign copyright release forms, and agree to be included in any correspondence between MJS and the authors before submitting a work to MJS. For personal or educational use, permission is given without charge to print or create digital copies of all or portions of a MJS article. However, copies must not be produced or distributed for monetary gain. It is necessary to respect the copyright of any parts of this work that are not owned by MJS.