Tribological Characteristics of Silicon Carbide – Epoxy Nanocomposites

Bahjat B. Kadhim

Abstract


The applications of polymer nanocomposites have been increased in fast, in technological applications and engineering materials for seal and sliding components in many machines, devices, tools and variance vehicles. In this research friction and wear coefficients of epoxy reinforced by nanoparticles silicon carbide in terms of variance volume fractions have been tested. Mechanical – layup method with ultrasonic technique for the dispersion of the nanoparticles within the polymer matrix are used. Wear and friction coefficient tests are created out using pin -on-disc technique. The results showed significant improvement in wear resistance and low coefficient of friction for 10 vol. % nanocomposites compared with the matrix alone. It can be concluded from scanning electron microscopy (SEM) results before and after the tests that the wear was transformed from the severe to the moderate.

Keywords


Friction, Wear, Polymer Composites, Pin on disc, and SiC nanoparticles.

Full Text:

PDF

References


A. S. Manmode, D. M. Sakarkar, and N. M. Mahajan, "Nanoparticles-tremendous therapeutic potential: a review," International Journal of PharmTech Research, vol. 1, pp. 1020-1027, 2009.

P. Nayak, S. K. Sahoo, A. Behera, P. K. Nanda, P. Nayak, and B. Guru, "Synthesis and characterization of soy protein Isolate/MMT nanocomposite film for the control release of the drug ofloxacin," World Journal of Nano Science and Engineering, vol. 1, p. 27, 2011. CrossRef

K. Zhu and S. Schmauder, "Prediction of the failure properties of short fiber reinforced composites with metal and polymer matrix," Computational Materials Science, vol. 28, pp. 743-748, 2003. CrossRef

T. Ahmad and O. Mamat, "The development and characterization of zirconia-silica sand nanoparticles composites," World Journal of Nano Science and Engineering, vol. 1, p. 7, 2011. CrossRef

M. Sumita, T. Shizuma, K. Miyasaka, and K. Ishikawa, "Effect of reducible properties of temperature, rate of strain, and filler content on the tensile yield stress of nylon 6 composites filled with ultrafine particles," Journal of Macromolecular Science, Part B: Physics, vol. 22, pp. 601-618, 1983. CrossRef

Q. Wang, J. Xu, W. Shen, and W. Liu, "An investigation of the friction and wear properties of nanometer Si 3 N 4 filled PEEK," Wear, vol. 196, pp. 82-86, 1996. CrossRef

K. J. Klabunde, J. Stark, O. Koper, C. Mohs, D. G. Park, S. Decker, et al., "Nanocrystals as stoichiometric reagents with unique surface chemistry," The Journal of Physical Chemistry, vol. 100, pp. 12142-12153, 1996. CrossRef

M. Scanlon and R. Cammarata, "Mechanical properties of nanocomposite granular metal thin films," Journal of applied physics, vol. 76, pp. 3387-3393, 1994. CrossRef

Z. Lu and K. Friedrich, "On sliding friction and wear of PEEK and its composites," Wear, vol. 181, pp. 624-631, 1995. CrossRef

J. V. Voort and S. Bahadur, "The growth and bonding of transfer film and the role of CuS and PTFE in the tribological behavior of PEEK," Wear, vol. 181, pp. 212-221, 1995. CrossRef

A. C. Balazs, T. Emrick, and T. P. Russell, "Nanoparticle polymer composites: where two small worlds meet," Science, vol. 314, pp. 1107-1110, 2006. CrossRef

F. K. Farhan, B. B. Kadhim, B. D. Ablawa, and W. A. Shakir, "Wear and Friction Characteristics of TiO2–ZnO/PMMA Nanocomposites," European Journal of Engineering Research and Science, vol. 2, pp. 6-9, 2017. CrossRef

L. Yao, A. Boker, J. He, and K. Sill, "Self-directed self-assembly of nanoparticle/copolymer mixtures," Nature, vol. 434, p. 55, 2005. CrossRef

M. Q. Zhang, G. Yu, H. M. Zeng, H. B. Zhang, and Y. H. Hou, "Two-step percolation in polymer blends filled with carbon black," Macromolecules, vol. 31, pp. 6724-6726, 1998. CrossRef

M. J. Adams, A. Allan, B. J. Briscoe, P. J. Doyle, D. M. Gorman, and S. A. Johnson, "An experimental study of the nano-scratch behaviour of poly (methyl methacrylate)," Wear, vol. 251, pp. 1579-1583, 2001. CrossRef

N. Chand, A. Naik, and S. Neogi, "Three-body abrasive wear of short glass fibre polyester composite," Wear, vol. 242, pp. 38-46, 2000. CrossRef

K. Edwards, "An overview of the technology of fibre-reinforced plastics for design purposes," Materials & design, vol. 19, pp. 1-10, 1998. CrossRef

B. S. Tripathy and M. J. Furey, "Tribological behavior of unidirectional graphite-epoxy and carbon-PEEK composites," Wear, vol. 162, pp. 385-396, 1993. CrossRef

B. B. Kadhim, Z. A. Jabur, and F. K. Farhan, "Tribological Properties Of Sic Filled Polymer Blend Nanocomposites," International Journal of Advances in Engineering & Technology, vol. 8, p. 1, 2015.

H. Pıhtılı and N. Tosun, "Effect of load and speed on the wear behaviour of woven glass fabrics and aramid fibre-reinforced composites," Wear, vol. 252, pp. 979-984, 2002. CrossRef

V. Srivastava and J. Pathak, "Friction and wear properties of bushing bearing of graphite filled short glass fibre composites in dry sliding," Wear, vol. 197, pp. 145-150, 1996. CrossRef

Z.-Z. Zhang, Q.-J. Xue, W.-M. Liu, and W.-C. Shen, "Friction and wear properties of metal powder filled PTFE composites under oil lubricated conditions," Wear, vol. 210, pp. 151-156, 1997. CrossRef

L. Yu, W. Liu, and Q. Xue, "Effect of various inorganic fillers on the friction and wear behaviors of polyphenylene sulfide," Journal of applied polymer science, vol. 68, pp. 1643-1650, 1998.

L. Yu, S. Bahadur, and Q. Xue, "An investigation of the friction and wear behaviors of ceramic particle filled polyphenylene sulfide composites," Wear, vol. 214, pp. 54-63, 1998. CrossRef

M. Awham and H. Sadeer, "Study of The Wear Rate of Some Polymer Materials In Different Conditions," Applied Science Department, University of Technology/Baghdad, 2010. B. Aldousiri, A. Shalwan, and C. Chin, "A review on tribological behaviour of polymeric composites and future reinforcements," Advances in Materials Science and Engineering, vol. 2013, 2013.

P. Samyn, "Tribophysical interpretation of scaling effects in friction and wear for polymers," Ghent University, 2007.

W. Brostow, A. Buchman, E. Buchman, and O. Olea‐Mejia, "Microhybrids of metal powder incorporated in polymeric matrices: Friction, mechanical behavior, and microstructure," Polymer Engineering & Science, vol. 48, pp. 1977-1981, 2008. CrossRef

M. Cho, S. Bahadur, and J. Anderegg, "Design of experiments approach to the study of tribological performance of Cu-concentrate-filled PPS composites," Tribology international, vol. 39, pp. 1436-1446, 2006. CrossRef

H. Unal, A. Mimaroglu, U. Kadıoglu, and H. Ekiz, "Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions," Materials & Design, vol. 25, pp. 239-245, 2004. CrossRef

R. Liu and D. Li, "Modification of Archard's equation by taking account of elastic/pseudoelastic properties of materials," Wear, vol. 251, pp. 956-964, 2001. CrossRef




DOI: http://dx.doi.org/10.23851/mjs.v28i1.328

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Al-Mustansiriyah Journal of Science

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.


Copyright (c) 2018 by Al-Mustansiriyah Journal of Science
ISSN: 1814-635X (Print), ISSN: 2521-3520 (online)