Studying the Effect of Titania Additions on some properties of Porcelain

Abbas K. Saadon

Abstract


The paper presents the production of porcelain for the ceramic by inexpensive natural raw materi-als, the principal raw materials of porcelain composition was selected consisting of 50% kaolin, 25% feldspar, 25% silica, the sample synthesized were characterize by X-ray diffraction (XRD) technique, than study the effect additives at different concentration form titanium oxide (๐‘‡๐‘–๐‘‚2 )at (2, 5, 10, 15, 20) wt% on some physical and dielectric properties of porcelain. The samples are prepared by the conventional manufacturing method. The physical and dielectric properties of porcelain show that change considerably with the sub-stituent sample. It was found that the increase of the titanium oxide (๐‘‡๐‘–๐‘‚2 ) additives of all our sample produce increasing in dielectric constant and bulk density, while decreasing with open porosity and dielectric loss tangent.

Keywords


porcelain, feldspar,๐‘‡๐‘–๐‘‚2 , dielectric constant, dielectric loss tangent

Full Text:

PDF

References


Alshamri, A. K, 2007, the effect of mineral-izes on ceramic body and studing some physical properties, thesis MCS, college of sciences for women, Baghdad university.

Al-Bermany, K. J, (2009), Enhancement mechanical and rheological properties and some is different industrial application, j. of collage of Education, No.2. Vol.2.

Boffetta P. Gaboriean V, Nadon L, Parent M โ€“ E, weirder pass E, siemiatycli J, (2001), Exposure to titanium dioxide and risk of lung cancer in a population โ€“ based study from Montreal, Scand, J. work Environ Health ,27(4), pp.227 โ€“ 232.

Maslennikavo. G. N, and Platov. Y. T,(2013), the process of porcelain formation in presence of additives (areview),glass and ceramic, vol .55,no.1-2.

Bark. I. M,2013, effect of waste glass and zircon on ceramic properties and microstruc-ture of porcelain tiles, Advances in apple ce-

ramic, vol.104, no.5, pp.243-248. ,

Verm a. A., Theakur. O. P., and Mendirate. R. A., 2005, study the physical and dielec-tric properties of ferrit-Sic compsite, materi-al science and engineering, vol.116, no.1, pp.1-6.

Liebermann, J. Avoiding quartz in alumina porcelain for high-voltage nsulators. Ameri-can Ceramic Society Bulletin, 2001, 80.6: 37-42.

De Sola, Esther Ruiz, et al. Solubility and microstructural development of TiO2-containing 3Al2 O3ยท 2SiO2 and 2Al2 O3ยท SiO2 mullites obtained from single-phase gels. Journal of the European Ceramic Soci-ety, 2007, 27.7: 2647-2654.

fadhil,A. ch. Fadaa,Q. S; Innam. W. and Zahraa,F;2015, the influence of magnesia addition and sintering temp on the properties of synthesized electrical porcelain.; Eng. of tech Journal ,33,part A(2).




DOI: http://dx.doi.org/10.23851/mjs.v28i2.513

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Al-Mustansiriyah Journal of Science

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.


Copyright (c) 2018 by Al-Mustansiriyah Journal of Science
ISSN: 1814-635X (Print), ISSN: 2521-3520 (online)