Production of TiO2 nanoparticles in different phases and shapes by using PLA and hydrothermal method

Wisam J. Aziz, Raad S. Sabri, Abbas K. Jarallah

Abstract


Abstract
Titanium dioxide was prepared using pulsed laser ablation (PLA) and hydrothermal method. Scanning electron microscopy images showed that the product from hydrothermal method had a nanotube shape, whereas those from PLA in liquid were nanoparticles. The optical properties in the absorption curve of product from the hydrothermal method were slightly greater than those from the PLA method, and the energy gaps were 3.39 and 3.26 eV for the hydrothermal method and PLA, respectively. XRD results showed that the TiO2 prepared through PLA showed one phase (rutile), whereas those prepared through hydrothermal method showed two phases (anatase and rutile). Moreover, the product from hydrothermal method had smaller particle size smaller than that from PLA. Furthermore, the product yield and the required reaction time of the hydrothermal method were higher than those of PLA.

Keywords


Nanoparticle, nanorods, Titanium dioxide, PLA, Hydrothermal

Full Text:

PDF

References


- Chen, X.; Mao, S. S. Synthesis of Titanium Dioxide (TiO2) Nanomaterials.J. Nanosci.Nanotechno.6, 906-925(2006,).

-Bavykin, D. V., Friedrich, J. M. & Walsh, F. C. Protonated titanates and TiO2 nanostructured materials: synthesis, properties, and applications. Adv. Mater. 18, 2807–2824 (2006).

-Hyun Kim, Bee LyongYang "Effect of seed layers on TiO2nanorod growth on FTO for solar hydrogen generation" international journal of hydrogen energy 40, 5 8 0 7- 5 8 1 4(2015).

-Lou Z, Li F, Deng J, Wang LL, Zhang T. Branch-like hierarchical heterostructure (a-Fe2O3/TiO2) : a novel sensing material for trimethylamine Gas sensor. Appl Mater Interfaces; 5:12310e6(2013).

- Harifi T, Montazer M. Photo-, bio-, and magneto-active colored polyester fabric with hydrophobic/hydrophilic and enhanced mechanical properties through synthesis of TiO2/Fe3O4/Ag nanocomposite. IndEngChem Res; 53:1119e29 (2014).

-T. Li, J. Moon, A. A. Morrone, J. J. Mecholsky, D. R. Talham, J. H. Adair, Langmuir, 15, 4328 (1999).

-P. Liu, Y. L. Cao, H. Cui, X. Y. Chen, G. W. Yang,Cryst. Growth Des.8, 559 (2008).

-K. Urabe et al., “Dynamics of pulsed laser ablation in high-density carbon dioxide including supercritical fluid state,” Journal of Applied Physics, vol. 114, no. 14, p.143303, ( 2013).

- Global Nanomaterials Market-Market Size, Demand and Forecasts to (2016).Accessed on 03.10.2014 fromhttp://www.academia.edu/6413132/Global_Nanomaterials_Market-

Market_Size_Demand_and_Forecasts_to_(2016).

-Kawai-Nakamura, A., Sato, T., Sue, K., Tanaka, S., Saitoh, K., Aida, K. & Hiaki, T. Rapid and continuous hydrothermal synthesis of metal and metal oxide nanoparticles with a microtube-reactor at 523 K and 30 MPa. Materials Letters 62: 3471-3471(2008).

-Reddy, K. M., Guin, D., Manorama, S.V. & Reddy, A.R. Selective synthesis of nanosized TiO2 by hydrothermal route: Characterization, structure property relation, and photochemical application. Journal of Materials Research 19: 2567-2575(2004).

-Weerachai Sangchay "The self-cleaning and photocatalytic properties of TiO2 doped with SnO2 thin films preparation by sol-gel method" EnergyProcedia 89, 170 – 176 (2016).




DOI: http://dx.doi.org/10.23851/mjs.v29i2.364

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Al-Mustansiriyah Journal of Science

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.


Copyright (c) 2018 by Al-Mustansiriyah Journal of Science
ISSN: 1814-635X (Print), ISSN: 2521-3520 (online)