Improvement of Corrosion Protection of Oil Pipeline Welding via Adding Tin Disulfide Nanoparticles

Atheer M. Jameel, Bahjat B. Kadhim, Fadhil K. Farhan

Abstract


The corrosion-resistant on the inner surface of the carbon pipeline welding alloys for two sections of the corrosion-resistant welding alloys (pure welding alloy) and welding alloys added Tin Disulfide Nanoparticles (SnS NPs) were welded by tungsten inert gas welding (TIG). The electrochemical behavior of the weld alloy was investigated at room temperature in 3.5% NaCl solution using potentiodynamic polarization. To reveal the corrosion resistance of alloys welded joints, some significant characterization parameters such as Ecorr, Icorr and in polarization curves were analyzed and compared. The surface morphology of corrosion products was also analyzed by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) for two cases. The results show that the corrosion resistance for welding alloys added SnS Nps appeared high corrosion resistance, lower corrosion rate, and higher protection efficiency by 48% compared with pure welding alloy.


Keywords


Corrosion; metal pipelines; carbon steel; welding; electrochemical.

Full Text:

PDF

References


Jia, Ru, Tuba Unsal, Dake Xu, Yassir Lekbach, and Tingyue Gu. "Microbiologically influenced corrosion and current mitigation strategies: a state of the art review." International biodeterioration & biodegradation 137 (2019): 42-58.

CrossRef

Wu, Tangqing, Maocheng Yan, Libao Yu, Hongtao Zhao, Cheng Sun, Fucheng Yin, and Wei Ke. "Stress corrosion of pipeline steel under disbonded coating in a SRB-containing environment." Corrosion Science 157 (2019): 518-530.

CrossRef

Ismail, A., and N. H. Adan. "Effect of oxygen concentration on corrosion rate of carbon steel in seawater." American Journal of Engineering Research 3, no. 1 (2014): 64-67.

Kadhim, Fadhil Sarhan. "Investigation of carbon steel corrosion in water base drilling mud." Modern Applied Science 5, no. 1 (2011): 224.

CrossRef

Rodionova, I. G., O. N. Baklanova, E. T. Shapovalov, I. I. Reformatskaya, A. A. Podobaev, S. D. Zinchenko, S. V. Efimov, E. Ya Kuznetsova, L. A. Malyshkina, and A. V. Drandusov. "Methods of evaluating the corrosion resistance of low-alloy and carbon tube steels under the service conditions of oil and gas pipelines." Metallurgist 49, no. 5 (2005): 173-182.

CrossRef

Cui, H. B., G. M. Xie, Z. A. Luo, J. Ma, G. D. Wang, and R. D. K. Misra. "The microstructural evolution and impact toughness of nugget zone in friction stir welded X100 pipeline steel." Journal of Alloys and Compounds 681 (2016): 426-433.

CrossRef

Ye, Zheng, Jihua Huang, Zhi Cheng, Yufeng Zhang, Li Xie, Jian Yang, Shuhai Chen, and Xingke Zhao. "A novel high efficiency low heat input welding method: High frequency electric cooperated arc welding." Materials Letters 252 (2019): 142-145.

CrossRef

Momber, A. W., and T. Marquardt. "Protective coatings for offshore wind energy devices (OWEAs): a review." Journal of Coatings Technology and Research 15, no. 1 (2018): 13-40.

CrossRef

López-Ortega, A., J. L. Arana, E. Rodríguez, and R. Bayón. "Corrosion, wear and tribocorrosion performance of a thermally sprayed aluminum coating modified by plasma electrolytic oxidation technique for offshore submerged components protection." Corrosion Science 143 (2018): 258-280.

CrossRef

Łatka, L., M. Szala, M. Michalak, and T. Pałka. "Impact of Atmospheric Plasma Spray Parameters on Cavitation Erosion Resistance of Al2O3-13% TiO2 Coatings." Acta Physica Polonica, A. 136, no. 2 (2019).

CrossRef

Czupryński, A. "Properties of Al2O3/TiO2 and ZrO2/CaO flame sprayed coatings." Spajanie Materiałów Konstrukcyjnych (2017).

CrossRef

Szala, M., A. Dudek, A. Maruszczyk, M. Walczak, J. Chmiel, and M. Kowal. "Effect of Atmospheric Plasma Sprayed TiO2-10% NiAl Cermet Coating Thickness on Cavitation Erosion, Sliding and Abrasive Wear Resistance." Acta Physica Polonica, A. 136, no. 2 (2019).

CrossRef

Czupryński, A., B. Tomiczek, J. Górka, and M. Adamiak. "Testing of flame sprayed Al2O3 matrix coatings containing TiO2." Archives of Metallurgy and Materials (2016).

CrossRef

Ikechukwu, Anyanwu Samuel, Eseonu Obioma, and Nwosu Harold Ugochukwu. "Studies on corrosion characteristics of carbon steel exposed to Na2CO3, Na2SO4 and NaCl solutions of different concentrations." The International Journal of Engineering and Science (IJES) 3, no. 10 (2014): 48-60.

Eddy, Nabuk Okon. "Green corrosion chemistry and engineering: opportunities and challenges." (2011).

American Society for Testing and Materials. "Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements: Designation: G5-13e1." ASTM, 2013.

Sekunowo, O. I., S. O. Adeosun, and G. I. Lawal. "Potentiostatic polarisation responses of mild steel in seawater and acid environments." international journal of scientific & technology research 2, no. 10 (2013): 139-145.

Behpour, M., S. M. Ghoreishi, N. Soltani, M. Salavati-Niasari, M. Hamadanian, and A. Gandomi. "Electrochemical and theoretical investigation on the corrosion inhibition of mild steel by thiosalicylaldehyde derivatives in hydrochloric acid solution." Corrosion Science 50, no. 8 (2008): 2172-2181.

CrossRef

Clément, Antoine, S. Laurens, G. Arliguie, and F. Deby. "Numerical study of the linear polarisation resistance technique applied to reinforced concrete for corrosion assessment." European Journal of Environmental and Civil Engineering 16, no. 3-4 (2012): 491-504.

CrossRef

Mousa, Fatin H., Ali S. Mahdi, Bahjat B. Kadhim, and Ali M. Ali. "Technological characteristics of perovskite solar cell windows using CdS-wurtzoid structure." In AIP Conference Proceedings, vol. 2190, no. 1, p. 020032. AIP Publishing LLC, 2019.

CrossRef




DOI: http://dx.doi.org/10.23851/mjs.v32i4.1028

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Al-Mustansiriyah Journal of Science

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.


Copyright (c) 2018 by Al-Mustansiriyah Journal of Science
ISSN: 1814-635X (Print), ISSN: 2521-3520 (online)