Tribological Characteristics Near Welding Limit for Petroleum Metal Pipelines

Atheer M. Jameel, Bahjat B. Kadhim, Fadhil K. Farhan

Abstract


Welding process is one of the most widely applied processes in the industry. This is due to the ease of the process and it's a quantitative process. The addition of metallic powders to the welding area has not been widely emphasized as a solution to amelioration the tribology characteristic of the welding area therefore the effect of adding metallic powders (SnS nanoparticles) to the welding area on tribology properties was studied. This effect was studied at the values of coefficient of friction, coefficient of wear and wear rate by using the ring – on – disc sliding wear test equipment was used to study the tribological behavior of low carbon steel (A 106 grade B) as pure, 6010 welded and SnS- 6010 welded) under changing loads with constant velocity and in one hour for each run the dry condition at ambient temperature. The results show the coefficient of friction, coefficient of wear and wear rate increased with up load.


Keywords


Wear; friction; metal pipelines; carbon steel; welding, pin -on- disc, disc – on – disc.

Full Text:

PDF

References


Węglowski, M. St, S. Dymek, M. Kopyściański, J. Niagaj, J. Rykała, Wim De Waele, and Stijn Hertelé. "A comprehensive study on the microstructure and mechanical properties of arc girth welded joints of spiral welded high strength API X70 steel pipe." Archives of Civil and Mechanical Engineering 20, no. 1 (2020): 1-18.

CrossRef

Hernandez-Rodriguez, M. A. L., D. Martinez-Delgado, R. Gonzalez, A. Pérez Unzueta, R. D. Mercado-Solís, and J. Rodriguez. "Corrosive wear failure analysis in a natural gas pipeline." Wear 263, no. 1-6 (2007): 567-571.

CrossRef

Dehghani, Ayoub, and Farhad Aslani. "A review on defects in steel offshore structures and developed strengthening techniques." In Structures, vol. 20, pp. 635-657. Elsevier, 2019.

CrossRef

Price, Seth J., and Rita B. Figueira. "Corrosion protection systems and fatigue corrosion in offshore wind structures: current status and future perspectives." Coatings 7, no. 2 (2017): 25.

CrossRef

Papatheocharis, Theocharis, Gregory C. Sarvanis, Philip C. Perdikaris, and Spyros A. Karamanos. "Fatigue of welded tubular X-joints in offshore wind platforms." In International Conference on Offshore Mechanics and Arctic Engineering, vol. 58790, p. V004T03A024. American Society of Mechanical Engineers, 2019.

CrossRef

Kong, Xiangfeng, Jing Lv, Nan Gao, Xin Peng, and Jing Zhang. "An experimental study of galvanic corrosion on an underwater weld joint." Journal of Coastal Research 84 (2018): 63-68.

CrossRef

Liang, Liang, Youxia Pang, Zongming Zhu, Yong Tang, and Yanghui Xiang. "Influencing factors of various combinations of abrasion, cavitation, and corrosion caused by multiphase flow impact." Transactions of the Canadian Society for Mechanical Engineering 44, no. 2 (2019): 234-243.

CrossRef

López-Ortega, A., J. L. Arana, E. Rodríguez, and R. Bayón. "Corrosion, wear and tribocorrosion performance of a thermally sprayed aluminum coating modified by plasma electrolytic oxidation technique for offshore submerged components protection." Corrosion Science 143 (2018): 258-280.

CrossRef

Vereschaka, A. А., M. A. Volosova, A. D. Batako, A. S. Vereshchaka, and B. Ya Mokritskii. "Development of wear-resistant coatings compounds for high-speed steel tool using a combined cathodic vacuum arc deposition." The International Journal of Advanced Manufacturing Technology 84, no. 5-8 (2016): 1471-1482.

CrossRef

Yu, Jinku, Yuehua Wang, XiCan Zhao, Qinyang Li, Qi Qiao, Jia Zhao, and Sen Zhai. "Wear resistance of ni-based alloy coatings." Advances in Materials Science and Engineering 2019 (2019).

CrossRef

Espallargas, N. "Introduction to thermal spray coatings." In Future Development of Thermal Spray Coatings, pp. 1-13. Woodhead Publishing, 2015.

CrossRef

Berger, Lutz-Michael. "Application of hardmetals as thermal spray coatings", International Journal of Refractory Metals and Hard Materials 49 (2015): 350-364.

CrossRef

Rahim, M. S. A., S. Nor Hayati, and H. Luay Bakir. "Plasma spray ceramic coating and measurement of developed coating behaviour." International Journal of Precision Technology 1, no. 2 (2009): 163-172.

CrossRef

Swain, Biswajit, Subrat Bhuyan, Rameswar Behera, Soumya Sanjeeb Mohapatra, and Ajit Behera. "Wear: A Serious Problem in Industry." In Tribology. IntechOpen, 2020.

CrossRef

Igartua, Amaya, Raquel Bayon, Ana Aranzabe, and Javier Laucirica. "Tribology: The Tool to Design Materials for Energy-Efficient and Durable Products and Process." In Friction, Lubrication and Wear. IntechOpen, 2019.

CrossRef

Georgescu, Constantin, Lorena Deleanu, and George Catalin Cristea. "Tribological behavior of soybean oil." In Soybean-Biomass, Yield and Productivity. IntechOpen, 2018.

CrossRef

Ma, Yunhai, Yucheng Liu, and Jin Tong. "Bamboo Wear and Its Application in Friction Material." In Bamboo-current and future prospects. IntechOpen, 2017.

CrossRef

Kawada, Shouhei, Seiya Watanabe, Shinya Sasaki, and Masaaki Miyatake. "Tribochemical reactions of halogen-free ionic liquids on nascent steel surface." Recent advances in ionic liquids. IntechOpen (2018): 47-65.

CrossRef

Berradja, Abdenacer. "A Tribo-Electrochemical Investigation of Degradation Processes in Metallic Glasses." Metallic Glasses: Properties and Processing (2018): 111.

CrossRef

Di Puccio, Francesca, and Lorenza Mattei. "Biotribology of artificial hip joints." World journal of orthopedics 6, no. 1 (2015): 77.

CrossRef | PubMed

Salim, Faiza M. "Tribological and Mechanical Characteristics of Dental Fillings Nanocomposites." Energy Procedia 157 (2019): 512-521.

CrossRef

Olaru, Dumitru, George C. Puiu, Liviu C. Balan, and Vasile Puiu. "A new model to estimate friction torque in a ball screw system." In Product engineering, pp. 333-346. Springer, Dordrecht, 2004.

CrossRef

Suresh, S. "wet chemical synthesis of Tin sulfide nanoparticles and its characterization." International Journal of Physical Sciences 9, no. 17 (2014): 380-385.

Mousa, Fatin H., Ali S. Mahdi, Bahjat B. Kadhim, and Ali M. Ali. "Technological characteristics of perovskite solar cell windows using CdS-wurtzoid structure." In AIP Conference Proceedings, vol. 2190, no. 1, p. 020032. AIP Publishing LLC, 2019.

CrossRef

Cantarelli, Miguel Angel, Roberto Gerardo Pellerano, Eduardo Jorge Marchevsky, and José Manuel Camiña. "Quality of honey from Argentina: study of chemical composition and trace elements." (2008).




DOI: http://dx.doi.org/10.23851/mjs.v32i4.1025

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Al-Mustansiriyah Journal of Science

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.


Copyright (c) 2018 by Al-Mustansiriyah Journal of Science
ISSN: 1814-635X (Print), ISSN: 2521-3520 (online)